Mikrotik RB911G-5HPacD-QRT
Mikrotik RB911G-5HPacD-QRT DetailsProduct code RB911G-5HPacD-QRTCPU nominal frequency 720 MHzCPU core count 1Size of RAM 128 MB10/100/1000 Ethernet ports 1Wireless standards 802.11a/n/acWireless chip model QCA9882Power Jack 1PoE in YesSupported input voltage 8 V – 30 VVoltage Monitor YesPCB temperature monitor YesDimensions 309x320x50mmOperating System RouterOSTested ambient temperature -30C to +70CLicense level 4Antenna gain DBI 24CPU QCA9557Max Power consumption 10.5WNumber of chains 2Storage type NANDStorage size 128 MB 5 GHzTransmit power (dBm) Receive Sensitivity Transmit power (mW)6MBit/s 31 -96 125954MBit/s 27 -81 501MCS0 30 -96 1000MCS7 27 -77 501MCS9 22 -72 158 RB911G-5HPacD-QRT QCA9557 1G all port testMode Configuration 1518 byte 512 byte…
Mikrotik RB911G-5HPacD-QRT
Details
Product code RB911G-5HPacD-QRT
CPU nominal frequency 720 MHz
CPU core count 1
Size of RAM 128 MB
10/100/1000 Ethernet ports 1
Wireless standards 802.11a/n/ac
Wireless chip model QCA9882
Power Jack 1
PoE in Yes
Supported input voltage 8 V – 30 V
Voltage Monitor Yes
PCB temperature monitor Yes
Dimensions 309x320x50mm
Operating System RouterOS
Tested ambient temperature -30C to +70C
License level 4
Antenna gain DBI 24
CPU QCA9557
Max Power consumption 10.5W
Number of chains 2
Storage type NAND
Storage size 128 MB
5 GHz
Transmit power (dBm) Receive Sensitivity Transmit power (mW)
6MBit/s 31 -96 1259
54MBit/s 27 -81 501
MCS0 30 -96 1000
MCS7 27 -77 501
MCS9 22 -72 158
RB911G-5HPacD-QRT QCA9557 1G all port test
Mode Configuration 1518 byte 512 byte 64 byte
kpps Mbps kpps Mbps kpps Mbps
Bridging none (fast path) 81.2 986.1 234.9 962.2 477.7 244.6
Bridging 25 bridge filter rules 81.2 986.1 118.4 485.0 119.5 61.2
Routing none (fast path) 81.2 986.1 234.9 962.2 408.2 209.0
Routing 25 simple queues 81.2 986.1 158.3 648.4 165.8 84.9
Routing 25 ip filter rules 64.8 786.9 70.4 288.4 60.9 31.2
Tümü tests are done with Xena Networks specialized test equipment (XenaBay),and done according to RFC2544 (Xena2544)
Max throughput is determined with 30+ second attempts with 0,1% packet loss tolerance in 64, 512, 1518 byte packet sizes
Values in Italic indicate that max throughput was reached without maxing out CPU, but because board interface configuration was maxed out
Test results show device maximum performance, and are reached using mentioned hardware and software configuration, different configurations most likely will result in lower results